Winemaking Made Easy
Letting The Gas Out
April 21st, 2009 by robin in wine making
Today we are going to discuss one of the most important tools in winemaking and it is probably the most overlooked. Anyone who has made wine before knows that the process of fermentation produces two major things – alcohol and carbon dioxide.
You probably know that much of the carbon dioxide fills the open space in the fermentation container or carboy and the excess escapes through the airlock, creating that wonderful bubbling we all love so much. However, did you know that often some carbon dioxide remains in the wine bound to the molecules? It is true, especially if you are fermenting at the lower end of the temperature range.
So how do you know when you have trapped carbon dioxide and what do you do to fix it? Let’s take that question one piece at a time. Sometimes the first answer is easy. You may take a sample of your wine with your wine thief and see bubbles rising quickly inside the thief as if it were a sparkling wine. Another method is to take a small taste of your wine and see if you feel slight tingling on your tongue. Unfortunately, neither of these methods are flawless nor very scientific, so the best rule of thumb is to assume there is trapped carbon dioxide and take steps to get it out.
To remove the trapped carbon dioxide, we need cavitation. Dictionary.com defines cavitation as “The rapid formation and collapse of vapor pockets in a flowing liquid in regions of very low pressure.” Translation, we need to get the wine moving and change the direction of the flow quickly to release the carbon dioxide. To do this, you can put your wine back into a sanitized primary fermentation vessel and use a large stainless steel spoon if you’d like, but take my word for it – that method is exhausting. Instead, I recommend purchasing a whip degasser and allow a drill to do the hard work for you.
Now there are are variety of whip degassers on the market and they range in price from under $10 to over $50. My experience tells me with this, you get what you pay for and the higher priced whips will work faster and more effectively than their counterparts.
So how do they work? Put the whip inside the carboy and attach a drill. Start the whip moving in one direction. As soon as you begin to see the wine move in that direction, quickly switch the direction on the drill and spin the whip in the other direction. Continue this process for several minutes. As you do this it is important that you not move the whip vertically in the carboy or break the surface of the wine as this will insert oxygen into the wine. I would be remiss if I did not warn you at this point. Often, if you have a substantial amount of trapped carbon dioxide and you are performing this whipping technique it is as if you “hit a wall” and the carbon dioxide will release all at once. If this is going to happen it is generally in the first minute so be on alert. If your wine begins to foam suddenly, simply stop the whip and let the wine rest for a bit. The carbon dioxide will escape and the foam will dissipate. You can then whip it a bit more just to make sure you got it all, but in the end you will have removed that unwanted carbon dioxide and you can move on to stabilize and clear your wine.
Blog Content © 2009 Vintners Circle Franchising LLC. Any duplication or use of information from this blog without reference and linking to www.VintnersCircle.com is strictly prohibited.